Hypo

15% Concentrated Chlorine

Commercial grade concentrated Sodium Hypochlorite solution containing 150g/Lt FAC when packed. Multiple
exterior and municipal facility application for destaining and maximum microbial control.

Directions

Interior Food Process Hard Surfaces

Use at a ratio of 0.3-0.6% solution for hard surface sanitising.

Vegetable/Fruit Processing Aid

Suitable for low PPM treatment of processed vegetables and fruit where

sodium hypochlorite is deemed approved for use. Generic MPI Approval. Dosage rates to suit specific applications, however as a general guide 20-30PPM (1:100 provides approx. 1500PPM FAC, 1:1000 provides approx. 150PPM).

Laundry Stain Removal

Use at 1:200 (0.5%, 5mls per litre).

Exterior Buildings

Use at a ratio of 1:100 to 1:50 (1-2% solution, 10-20ml per litre) with potable water.

Swimming Pools

Use at 300mls per 10,000 litres each day and 500mls per 10,000 litres weekly.

Pool Shock Dose

Use at 1000mls per 10,000 litres of water.

Good Practice

Under Good Practice Protocol based on accepted international research a 0.3% solution of this product diluted

with potable water is recommended with liberal application on clean hard surfaces with a minimum contact

time of 5 minutes. At this concentration the product provides 500PPM FAC.

Similar Products

This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.

  • WIDE-SPECTRUM CONTROL
  • STAIN REMOVAL
  • FAST-ACTING BLEACH
  • HIGH STRENGTH
  • LOW COST-IN-USE
  • SANITISES & DISINFECTS

MPI APPROVED (GENERIC PART 4.1.7)

(All animal product except dairy)

After using this material, food surfaces must be thoroughly rinsed with potable water before production starts.

Available Sizes

Hypo (5L)FK-HYPO05
Hypo (20L)FK-HYPO20
Hypo (200L)FK-HYPO200
Hypo (APP Spray)Spray Applicator

Downloads

Chemical Solutions Sustainability Policy

We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.

Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.

This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.

Interested in Media Hub? Contact Us

MPI Catalogue

Free download!

Example of Kemsol MPI Catalogue

A handy guide containing all our Kemsol products with MPI approval

Click to get your copy