Formulated as an environmentally safe alternative to solvent based and non-biodegradable water based cleaning systems. Effectively on oils, grease and other hard surface soiling. Solids are suspended until flushed into holding tanks, separator pits or settling ponds where separation occurs to form distinct water and oil layers allowing easy removal of unwanted contamination from discharge water.
Spot cleaning
Use undiluted on oil and grease spots. Scrub affected areas as required and rinse with water.
Full floor coverage
Use at a ratio of 1:20 - 1:10 (5-10% soln, 50-100ml per litre) with potable cold water. Sweep or brush area prior to hosing off.
Water blaster
Use a 5% solution applied at low pressure and remove by blasting off at high pressure.
Plant and Machinery
Use at a ratio best determined for the job at a 10-20% solution and rinse off.
Parts cleaning by hand
Use at a 25-50% solution. Rinse with water.
This product not quite right? We've picked out a few more that may suit your application. Alternatively contact your Kemsol representative or email Kemsol for more information.
| Oil Clean WB (5L) | FK-OILCL05 |
| Oil Clean WB (20L) | FK-OILCL20 |
| Oil Clean WB (200L) | FK-OILCL200 |
We are committed to continual improvement in our environmental performance, and have established a number of goals and initiatives helping achieve this objective.
Where possible we always use biodegradable raw materials and all our finished product packaging is reusable or recyclable.
This is only a start, we continually strive to better our environmental performance. Visit chemicalsolutions.co.nz for more information.
©2024 Kemsol. Site by Zulu Shopfront
A handy guide containing all our Kemsol products with MPI approval
Click to get your copy
Log in to Media Hub 
