Sani-Foam

For automatic dilution devices, depending on soiling levels and required speed of clean, foam at a ratio of 1:20 (5% solution, 50ml per litre) to 1:100 (1% solution, 10ml per litre) with potable cold water.

Adjust air pressure (if applicable) to achieve optimum foam density. Foam surfaces and equipment, and leave for 5-10 minutes before brushing and/or thoroughly rinsing.

For general medium-duty cleaning use at a ratio of 1:50 (2% solution, 20mls per litre) with potable water.

Under Good Practice Protocol based on accepted international research a 1.6% solution of this product, diluted with potable water, is recommended with liberal application on clean hard surfaces with a minimum contact time of 5 minutes. At this concentration the product provides 500PPM FAC.